'Free 3d Model Making technique'
1. Decide the Wire Model and size ( the 3d model look is important). To save clay and to
reduce the
weight of the wire model- for thick portions like head and chest make a
tight ball of waste news paper. Make a rough shape with the help of
medium size wire( FIG-A ).
2. Now give the required thickness by wrapping more news papers (FIG-B).
If weight is not a issue and you have sufficient clay, you may skip this step.
3. Cover the entire body with clay, giving model 3d look.(FIG-C)
4. Put some extra clay on the portions, you may like to give a cloth like look. (FIG-D)
5. Mark the portion of eyes, nose, mouth etc. with the help of a niddle.(FIG-E)
6. Remove some clay from the area marked for eyes (to fit the eye ball
in this cavity). Add some extra clay (shown with light brown in figure) for
eye brow, cheaks, ears etc.(FIG-F)
7. Make a small ball of clay (as a eye ball) and place in the eye cavity of
model.(FIG-G & H)
8. Make thin strip of clay and place around the eyes.(FIG-I)
FIG- A
FIG- B
FIG- C
FIG- D
FIG- E
FIG- F